Toupret TTLIP01.5GB Fine Surface Filler - 1.5kg
Achieve an exceptionally smooth finish with Toupret 1.5kg fine surface filler. Ready-to-use interior paste dries white in 8 hours with no need to sand.
- Express delivery express Mon to Fri, order before 14:00
- Click and collect
- 30 day returns
Secure checkout
Stop wasting hours on endless sanding and spot priming. Wigley DIY brings you the Toupret TTLIP01.5GB Fine Surface Filler - 1.5kg, a ready-to-use interior paste designed to give you an exceptionally smooth finish over small defects on new or renovated substrates. Whether you are prepping gypsum plaster, plaster tiles, plasterboards, old painted surfaces, any fillers, cement, or concrete, this white filler goes on manually with a filling knife, blade, or trowel at a typical recommended application thickness of 0.5mm, up to a maximum recommended application thickness of up to 1 mm.
You can overcoat it as soon as the filler is dry with any Toupret filler, and any type of paint or wall coating, with a ready to paint time of 8 Hours and a working time of No limit. Clean your tools easily with water afterwards, knowing you are using an A+ IAQ (Indoor Air Quality) classified product with an adhesion filler/substrate (EN 16-566) of > 0.5 Mpa and a coverage g/m² (at 1mm thickness) of 450.00.
Features
- Ready to use interior surface filler for fine smoothing over small defects
- Provides an exceptionally smooth finish to enhance paint appearance
- No need to sand or spot prime
- Suitable for unpainted or painted new or renovated substrates
- Compatible with gypsum plaster, plaster tiles, plasterboard, old painted surfaces, fillers, cement, and concrete
- Can be overcoated with any Toupret filler and any type of paint or wall coating
- Dries to a white colour
- Clean tools with water
Specifications
| Surface condition | Interior |
|---|---|
| Task | Fine finishing surfaces |
| Application method | Manual |
| Time between coats | As soon as the filler is dry |
| Surfaces | New or renovated substrates, either unpainted or painted: Gypsum plaster, plaster tiles, plasterboards, old painted surfaces, any fillers, cement, concrete |
| Overcoat with | Fine Surface Filler can be overcoated with any Toupret filler, and any type of paint or wall coating. |
| Maximum recommended application thickness | Up to 1 mm. |
| Mixing rate | Ready to Use |
| Ready to paint time | 8 Hours |
| Working time | No limit |
| Application tools | Filling knife, Blade, Trowel |
| Recommended temperature and humidity for application | Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%. |
| Adhesion | Adhesion filler/substrate (EN 16-566) : > 0.5 Mpa |
| Coverage g/m² (at 1mm thickness) | 450.00 |
| IAQ (Indoor Air Quality) classification | A+ |
| Colour when dry | White |
| Guarantee | Product guaranteed for 12 months from purchase, in original package and stored away from sunlight and frost. |
| Clean tools with | Water |
| Brand | Toupret |
|---|